December 7, 2022

Project Vega

Journey to Health and Wellness

The Process of Putting Wallpaper on Your Property

3 min read

You can include color, texture, or pattern on your walls with the wallpaper when you figure out how to hang it. The right techniques and methods make even the most tricky tasks seem easy. When you learn this technique, you can develop a wide range of wallpaper styles, whether you wish to cover the whole space or simply a couple of accent walls. This guide will teach you everything you wish to know to achieve your desired wallpapered walls.

Steps on How to Put Wallpaper

When it pertains to wallpapering an area, it appears to be more difficult than it is. You can know the fundamentals with a little knowledge, the appropriate equipment, and a little practice. Newbie blunders can be eliminated or treated entirely with the ideal paper and pattern. Choose high end wallpaper brands to ensure the quality of your wallpaper. Using this article, you can learn how to paste the wallpaper you intend.

Prepare Your Wall

The preliminary step is ensuring your wall is ready for the wallpaper. To guarantee your safety, switch off the electricity. Utilizing pliers or screwdrivers, take out all nails, screws, or hooks. Tape over the electrical outlets and also the walls. Taping your outlets ensures that your paper installation is as tidy as possible. Remove every outdated wall cover from the sidewalk. Ensure all outdated wallpapers, including the adhesive, have been removed; after getting rid of them, clean the wall to eliminate dirt and mold. Cracks have to be covered for smooth wallpapering. Use sandpaper to smooth the spot into the surface after you have applied your wall putty.

Measure Your Wall

Measure your wall to figure out the wallpaper’s size. Measure from the top or bottom and put on about 20cm for flexibility. It can conceal incorrect dimensions. Afterward, lay out your wallpaper as preferred. Make marks or draw lines where the material must be cut by carefully unfolding it on a table. This is your first strip, so go gradually when trimming it out. Utilize a light pencil or draw a line on the wallpaper’s backside.

Paste Your First Strip

Sticking wallpaper is a usual rule. It’s not always easy and demands plenty of effort. Beware when putting on the first strip of tape to the wall. After you have set it from the ceiling and at the top and bottom, smooth it down the wall with a tidy fabric or wallpaper brush, leaving around two inches hanging. If wrinkles appear, carefully extract the paper from the wall. Gradually smooth it out until it gets to the wrinkly part. When pasting, it is advisable to use the manufacturer’s instructions.

Lay the Second Strip

Overlapping and pattern matching are more complicated in this second strip. The pattern sequence does not always exist in wallpaper. It’s completely up to you how you intend to lay the ones that are not free. On the other hand, wallpapers with patterns necessitate matching and will result in waste otherwise used correctly. Choose your style here and find inspiration in matching the patterned wallpaper properly.

Wallpaper Corners and Tricky Areas

Put your paper so it wraps around to the next wall to produce the corners. As you did previously, you must pair up the patterns at the sides. After that, utilizing a fabric or brush, gently press it in. When the first wall is perfectly aligned to the edge, cut a little at the top with scissors. The paper will be easier to fold after the laceration is developed. For inspiration on wallpaper designs for your bedroom, visit